Order by phone +49 (0)6155 8877766

DJI Ronin-MX 3-Axis Gimbal

SKU: 0000015007

3-Axis Gimbal / Load Capacity 4,5 kg / Strengthened Motors / Weight 2,7 kg

DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
DJI RONIN-MX 3-Achsen stabilisiertes Handheld-Gimbalsystem
Availability Available immediately, delivery about 1-5 days.
€1,599.00 €1,099.00 €923.53

DJI Ronin-MX 3-Axis Stabilized Handheld Gimbal System

Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration.

A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.

Powerful and Accurate
Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.

Freedom to Move
A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.

Wireless Control and Transmission
The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.

Comprehensive App Control
Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization of the Ronin-MX and its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.

Refined Balance
A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility and ability to handle rapid movements or high-G situations.

Magnesium Construction
Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.

Strengthened Motors and ESCs
A combination of stronger motors and ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness and power allows the system to better withstand wind resistance when mounted to moving vehicles and aircraft, as well as more rapid movements.

External Camera Battery
Cameras such as the RED EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable free mounting point for a 2nd DJI Intelligent Battery. This provides two 12V P-tap power sources for powering cameras and accessories.

Intelligent Batteries
Intelligent Ronin-MX batteries are compact, light and offer a long battery life of 3 hours. Multiple batteries can be easily brought to set for a full day of filming. Over-charge and over-depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by clear LEDs and in the DJI GO app.

Remote Focus Control
The DJI Focus uses DJI’s expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just ±0.02 of accuracy in the hand so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so that subjects can be kept in focus no matter how they move. When upgraded with a Focus Expansion Module, the Focus can control aperture or focus across Lightbridge 2’s 3.1miles (5km) range.

Precision Solo Camera Control
Simple to set up and use, the DJI Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.

2nd Operator Control
A wireless 2.4GHz remote controller is included with the Ronin-MX enabling a 2nd operator to remotely control pan, tilt, roll, and other functions. By using the optional Lightbridge 2 Remote Controller, you have long range control of the Ronin-MX up to 3.1 miles (5km).
A wireless 2.4GHz remote controller is included with the Ronin-MX enabling a 2nd operator to remotely control pan, tilt, roll, and other functions. By using the optional Lightbridge 2 Remote Controller, you have long range control of the Ronin-MX up to 3.1 miles (5km).

Delivery Contents:
Gimbal x1
Handle Bar x1
Remote Control – 2.4 GHz x1
Tuning Stand x1
Charger x1
DJI Intelligent Battery x2
Cable Pack x1
Micro USB Cable x1
Camera Mounting Plate x1
Upper Mounting Plate x1
Vibration Absorber X1

Accessories Package
Camera Screw A (1/4”) x2
Camera Screw B (3/8”) x2
Camera Screw C (1/4”) x2
Camera Screw D (3/8”) x2
Lens Support Screw x1
Lens Support x1
Allen Wrench x4 (2 mm, 3 mm, 4mm, 3/16”)


GENERAL

 

Built-In Functions
Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Aerial Mode
-Jib or Wirecam Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported


MECHANICAL & ELECTRICAL CHARACTERISTICS

 

Working Current
Static current: 300mA (@16V); Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Operating Temperature
5° F ~ 120° F (-15° C ~ 50° C)
Weight
Including handle bar: 6.11 lb (2.77 kg); including vibration absorber, without handle bar: 4.74 lb (2.15 kg)
Gimbal Dimensions
Excluding handle bar: 280 mm (W) × 370 mm (D)x 340 mm (H); including handle bar: 560 mm (W) × 370 mm (D) × 440 mm (H)


PERIPHERAL

 

Camera Tray Dimensions
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections
12V Regulated P-Tap × 2, USB 500mW × 1, DJI Lightbridge × 1
GCU Input Power
4S Ronin-M Battery
Connections
2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements
Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements
iOS 7.1 or above; Android 4.3 or above


WORKING PERFORMANCE

 

Load Weight (Reference Value)
10 lb (4.5 kg)
Angular Vibration Range
± 0.02°
Maximum Controlled Rotation Speed
Pan axis: 200°/s; Tilt axis: 100°/s
Roll axis: 30°/s



Mechanical Endpoint Range
Pan axis control: 360°; Tilt axis control: +270° to -150°; Roll axis control: ± 110°
Controlled Rotation Range
Pan axis control: 360°; Tilt axis control: +45° to -135°; Roll axis control: ± 25°

We found other products you might like!

DJI Ronin 2 Basic Combo

DJI Ronin 2 Basic Combo

€5,799.00 €4,873.11
DJI Ronin 2 Professional Combo

DJI Ronin 2 Professional Combo

€7,199.00 €6,319.00 €5,310.08
DJI Ronin-S

DJI Ronin-S

€749.00 €629.41
Moza Pro

Moza Pro

€2,749.00 €2,310.08
Your data will be collected and processed according to our privacy notice.
* Incl. Tax, excl. postal charges ** Excl. Tax, excl. postal charges