Ikan MS-PRO Beholder Gimbal & Dual Grip Handle KIT (MS-PRO-DGH-KIT)SKU: 1000000322
3 Axis Gimbal / Dual Grip Handle / Payload 0,9 kg / SmartphoneCompatible
Customer who views this item also viewed
Starting at €2,140.81 €1,799.00
Starting at €2,438.31 €2,049.00
Ikan MS-PRO Handheld Stabilizer
The Beholder MS-PRO is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.9 lbs. The Beholder MS-PRO is lightweight, easy to use, and can be carried in your camera bag. In addition, the MS-PRO is versatile enough to be used with a GoPro or Smartphone.
The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion.
Designed for Mirrorless Cameras
With a payload of up to 1.9 lbs., the MS-PRO has the ability to stabilize a wide range of today’s popular mirrorless cameras such as the Sony a6300, Sony a7SII, Panasonic GH5 and even cameras as small as a GoPro or smartphone.
Using a 32-bit controller with a 12-bit encoder, the MS-PRO uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have a greater battery life.
In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.
Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.
Multiple Follow Modes
The MS-PRO features 3 different follow modes. In Yaw-Axis Follow Mode, the MS-PRO will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the MS-PRO will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.
OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.
Easy to Use
With a newly designed quick-release baseplate system, the MS-PRO is easy to balance without the need of any tools.
Multiple Mounting Options
The MS-PRO handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the MS-PRO to a tripod, jib, or dual handle support system such as the Ikan DGH.
• Durable All Aluminum Construction
• 360 Degree Movement from Yaw Axis
• Works with Mirrorless Cameras up to 1.9lbs (900 grams)
• Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless Cameras as well as Phones and GoPro Cameras
• OLED Display Screen to show operating modes
• Equipped with 32-Bit Controller & 12-Bit Encoder
• Lithium Battery Powered- Low Maintenance, Eco-Friendly
• Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket
Ikan Dual Grip Handle (DGH)
Controlling your DS1, MS1 or EC1 Beholder Gimbal is a breeze with Ikan’s DGH Dual Grip Gimbal Handle! Constructed out of durable, lightweight aluminum, the DGH’s sturdy frame is specifically designed to make gimbal operation much easier!
After mounting your DS1, MS1 or EC1 on it, two comfortable, padded grip handles allow you to control the gimbal’s movement with your upper body instead of just your wrist. The shift in weight greatly increases stability and decreases arm fatigue! Depending on your shooting preference, you can operate the gimbal either over-handed or under-handed once it’s mounted on the DGH.
The built-in tabletop feet allow you to easily calibrate your gimbal hands-free and provide a firm base to set it on when not in use. Although the DGH is specifically designed for Ikan’s DS1, MS1 & EC1, it is compatible with most gimbals that feature a ¼”-20 mounting point on the gimbal’s base handle.
• Compatible with both the ikan DS1, MS1 & EC1 Gimbals
• Adds enhanced control and maneuverability to hand held gimbal operation
• Will work with most gimbals which include a 1/4"-20 & 3/8"-16 threaded mount on their base
• Made of durable yet lightweight aluminum
• Built-in feet allow the Handle to securely set on a table top for calibration or stationary shooting
• Comfort Grip handles help reduce fatigue and loss of grip
1 X Battery Cap With 3/8-16 Mount (Pre-Assembled)
1 X Battery Holder (Pre-Assembled)
1 X Instruction Manual
1 X MS-PRO Gimbal Stabilizer
1 X Micro USB AC Adapter
1 X Quick Release Plate (Pre-Assembled)
3 X 18650 Batteries
1 X 1/4"-20 D-Ring Screw (Pre-Assembled)
1 X Gimbal Crossbar
2 X Gimbal Crossbar Feet
2 X Rubber Grip Handles
1 X 3/8"-16 to 1/4"-20 Adapter (Pre-Assembled)
4 X 1/4"-20 Flat 5/32 Socket Cap Screws
1 X 5/32 Hex Key
|Battery Life:||Up to 20 Hours|
|Battery Type:||3 x 3.7v Li-Ion 18650|
|Camera Compatibility:||Most Mirrorless Cameras, Smartphones, GoPro|
|Payload:||1.9 lbs (900 grams)|
|Shipping Dimensions:||14.3 x 6.4 x 3.1 in.|
|Shipping Dimensions (Metric):||363.2 x 162.5 x 78.7 mm|
|Shipping Weight:||4 lbs|
|Shipping Weight (Metric):||1.8 kg|