Caligri Airtube Switch 100 Softbox

Caligri Airtube Switch 100 Softbox

The diffuser fabric is not firmly sewn, but is held in place with a Velcro connection. It is therefore replaceable. The scope of delivery includes 3 covers. Full, Half & Quarter. This allows you to adjust the degree of softness more precisely on set. The material underneath is completely transparent. If you need maximum brightness, you could also leave out the diffuser.
It is not only compatible with tube lights, but also with LED spotlights. So you can convert it into a tube light.
Otherwise, the principle is exactly the same as with the Classic series. The light is fixed in place with Velcro strips. You can inflate it with a standard air pump (like an air mattress). The diameter increases to 19 cm. You can limit the light cone using curtains. Important operating elements of the light remain freely accessible.

Matching Fresnel attachments

• Aputure 2X Fresnel
• Nanlite FL-20
• Prolycht Orion 300 Fresnel 2x
• and many others

Matching LED headlights

• Kelvin Epic 300
• Aputure 300D/300X
• Amaran 300C
• Prolycht 300FS
• Nanlite Forza 300
• and many more

The following tube lights can be mounted directly:

• Amaran T2c
• Astera AX-1
• Astera FP1-BTB Titanium Tube
• 2x Astera FP2 Helios
• Ledgo AltaTube 80C
• PavoTube 15C color effect light

Dimensions when assembled

• Total length 110cm
• translucent part 100cm
• Diameter 19cm

characteristics

• Suitable for all tube lights with a length of 100cm
• changeable diffuser mats
• Can be used with headlight via Fresnel adapter (adapter set required, available separately)
• The tube light is fixed using Velcro strips
• The softbox can be inflated with a standard air pump from a camping retailer (or with your mouth if necessary), max. air pressure 0.83 bar
• Valve opening diameter: 1.75cm / 0.68"
• Light cones can be limited using curtains
• Rear light can be covered with an apron
• The softbox, curtains and apron are designed to ensure light controls remain easily accessible
• Made in Germany from proven, high-quality materials (Magic Cloth® and Ultrabounce® from TRP worldwide)

Delivery handling

• Airtube Switch 100
• Diffuser mats, 1x full, half and quarter each
• Curtains, consisting of two parts (for side screening)
• Apron, consisting of two parts (to cover taillight)
• Replacement Velcro strips to fix the tube
• gym bag
• mechanical hand air pump (free addition)

safety instructions

• If the light is completely covered with curtains and aprons, the ambient temperature is very high and/or the light is running at full power, you should keep an eye on the temperature. It may be necessary to let the lamp cool down a little or to ensure sufficient ventilation.
• The AIRTUBE can withstand temperatures up to 85°C / 185°F
• Maximum air pressure: 12 PSI / 0.83bar . Especially when inflating with a compressor, you should keep an eye on the pressure so that the seams remain intact.
• To protect the Airtube from kinks or other damage, you should carefully roll it up when storing or transporting it. We recommend storing them in the box.

Care tips

• The best way to clean the white, translucent fabric is with warm water and, if necessary, a gentle soap
• It is best to clean the black casing with warm water and common household cleaner