Caligri Airtube Switch 50 Softbox

Caligri Airtube Switch 50 Softbox

The diffuser fabric is not firmly sewn, but is held in place with a Velcro connection. It is therefore replaceable. The scope of delivery includes 3 covers. Full, Half & Quarter. This allows you to adjust the degree of softness more precisely on set. The material underneath is completely transparent. If you need maximum brightness, you could also leave out the diffuser.
Otherwise, the principle is exactly the same as with the Classic series. The light is fixed in place with Velcro strips. You can inflate it with a standard air pump (like an air mattress). The diameter increases to 19 cm. You can limit the light cone using curtains. Important operating elements of the light remain freely accessible.
The Airtube Switch 50 is a softbox for tube lights with a length of 50 cm.

Suitable for the following tube lights

• All LED tubes with a maximum length of 50 cm such as:
• Astera FP2 Helios
• Aputure INFINIBAR PB3
• Amaran PT1c

Dimensions when assembled

• Total length 60cm
• translucent part 50cm
• Diameter 19cm

characteristics

• changeable diffuser mats
• The lamp is fixed using Velcro straps
• The softbox can be inflated with a standard air pump from a camping retailer (or with your mouth if necessary), max. air pressure 0.83 bar
• Valve opening diameter: 1.75cm / 0.68"
• Light cones can be limited using curtains
• Rear light can be covered with an apron
• The softbox, curtains and apron are designed to ensure light controls remain easily accessible
• Made in Germany from proven, high-quality materials (Magic Cloth® and Ultrabounce® from TRP worldwide)

Delivery handling

• Airtube Switch 50
• Diffuser mats, 1x full, half and quarter each
• Curtains, consisting of two parts (for side screening)
• Apron, consisting of two parts (to cover taillight)
• Replacement Velcro strips to fix the tube
• gym bag
• mechanical hand air pump (free addition)

safety instructions

• If the light is completely covered with curtains and aprons, the ambient temperature is very high and/or the light is running at full power, you should keep an eye on the temperature. It may be necessary to let the lamp cool down a little or to ensure sufficient ventilation.
• The AIRTUBE can withstand temperatures up to 85°C / 185°F
• Maximum air pressure: 12 PSI / 0.83bar . Especially when inflating with a compressor, you should keep an eye on the pressure so that the seams remain intact.
• To protect the Airtube from kinks or other damage, you should carefully roll it up when storing or transporting it. We recommend storing them in the box.

Care tips

• The best way to clean the white, translucent fabric is with warm water and, if necessary, a gentle soap
• It is best to clean the black casing with warm water and common household cleaner